Dr. WOLFF - Training Diagnostic
Simplified Training Plan
Collaboration with Lanista
By combining the back-check software with Lanista's AI and training planning, we were able to significantly simplify
the processfrom measurement to the finished training plan. It is now possible to generate an exercise selection or a
customized training plan based on a back-check measurement in 3 steps:
• Importing the back-check measurement results.
• Visualizing the measured values.
• Specific exercise recommendations + training plans.
Holistic
HEALTH MANAGEMENT
Modern sports and training facilities offer holistic health management.
This is always based on accurate medical history and diagnostics.
A comprehensive assessment of the client's status is provided by software-assisted Dr. WOLFF diagnostic devices.
They
enable measurements of mobility and strength in various body regions.
The test results are evaluated, assessed, and documented using software that is consistent across all devices.
Taking into account risk factors and desired training goals, the trainer can now develop completely individualized
training plans for their clients.
After the training session, a new measurement is taken. This allows the
training success to be documented in comparison to the initial measurements.
Dr. WOLFF Diagnostic Equipment
Supported by Special Software
MOBILE MEASURING SYSTEM
BackCheck® 617
The BackCheck® 617 is a multifunctional, mobile measurement system for the scientific
analysis of the strength of different muscle groups.
The back test monitors the performance of the posture-stabilizing muscles.
The chip- and computer-assisted measurement technology:
• describes the current muscular status.
• reveals muscle strengths and weaknesses.
• provides tips for proper back training.
The decisive posture-relevant parameters are recorded under everyday conditions:
Cervical Spine Muscles
• Extensors, flexors.
• Lateral flexion right/left.
Core Muscles
• Extensors.
• Lateral flexion right/left.
More Core Muscles
• Flexors.
• Lateral Flexion right/left.
Upper Body Muscles
• Pressure.
• Traction of the upper extremities.
Customer-oriented documentation of measurement results and training progress is a basic prerequisite for successful
health training. The BackCheck® software identifies and quantifies existing muscular deficits and imbalances. The
reference data guarantees a reliable assessment of the test subject's muscular status.
Based on these results, the trainer defines the exercise measures. The BackCheck® 617 and its modern software are
the entry point for back training with high-quality assurance and training management.
BackCheck® 617 dimensions when installed: W 100 x L 136 x H 238 cm
Field-Proven
BACK-CHECK® COMPACT 608
Field-proven measurement technlogy:
• Display unit with touchscreen and data storage.
• Data transfer via chip.
• Two force sensors.
• Mains operation.
Back-check® software:
• Convenient data transfer via chip.
• Test documentation and evaluation.
• Display of the force curve.
BACK-CHECK® COMPACT 608: The complete range of functions in smaller dimensions:
Strength Measurement
Maximum force in Newtons for back-healthy individuals / back-patients (985 people tested)
Strength Ratio
Strength ratio Trunk flexion / trunk extension in percent (985 people tested)
Measurement Technology
Field-proven measurmenet technology
Scientific basis:
The scientific basis for the Back-check® was developed with the support of the Institute for Prevention and
Aftercare. As part of a study, sports scientists collected reference data for trunk flexion/extension. The key study
results summarized:
There is a correlation between extensors and flexors. Trunk extensors are stronger than flexors in healthy
individuals. Back patients are characterized by significantly lower maximum trunk extensor strength compared to
those without back problems. After a course of therapy of
5–10 training sessions, significantly higher back muscle strength values were recorded.
Installation dimensions of the BACK-CHECK® Compact 608: W 100 x L 136 x H 210 cm (without head shield: H 190
cm)
Isometric Leg Press
LEG-CHECK 627
Isometric maximum force measurement at the point of force application:
The innovative Leg-check 627 leg press enables precise measurement of leg strength in both legs, independent of the
side. The two separately arranged footplates are each equipped with high-performance measuring technology.
Here, the forces are recorded directly and precisely at the point of immediate force application. The
integrated display unit presents the recorded data via a modern touchscreen. The
computer stores the measured data on a chip – providing convenient transfer to the
evaluation software.
Reliable
Dynamic Measurement
In this additional function, the Leg-check 627 measures the maximum force value for each leg
during movement at submaximal training intensity. This test setup allows the test administrator to determine whether
the test subject is using the right and left legs with equal force during the movement.
Reliable measurement technology:
• Display unit with touchscreen and data storage.
• Data transfer to chip card.
• Two force sensors.
• Mains operation.
Software:
Convenient data transfer via chip card is followed by software-supported test evaluation and customer-oriented
documentation of the test results. The created reference data allows for a reliable assessment of leg strength. The
progress of rehabilitation measures and training interventions can be visualized through repeated measurements. They
serve to control training and ensure high quality and high level training management.
• Convenient data transfer via chip.
• Test documentation and evaluation.
• Display of the strength curve.
Leg-Check 627 dimensions: W 120 x L 200 x H 158 cm
TRAINING DIAGNOSTIC EQUIPMENT
BACK-CHECK 617
BACK-CHECK COMPACT 608
LEG-CHECK 627